Avaliação da capacidade de adsorção do CO2 em zeólita 12X com gases sintéticos e originados da pirólise do lodo de esgoto

This work depicts a study of the adsorption of carbon dioxide on zeolite 13X. The activities were divided into four stages: study batch adsorption capacity of the adsorbent with synthetic CO2 (4%), fixed bed dynamic evaluation with the commercial mixture of gases (4% CO2, 1.11% CO, 1 2% H2, 0.233% CH4, 0.1% C3, 0.0233% C4 argon as inert closing balance), fixed bed dynamic modeling and evaluation of the breakthrough curve of CO2 originated from the pyrolysis of sewage sludge. The sewage sludge and the adsorbent were characterized by analysis TG / DTA, SEM, XRF and BET. Adsorption studies were carried out under the following operating conditions: temperature 40 °C (for the pyrolysis of the sludge T = 600 °C), pressures of 0.55 to 5.05 bar (batch process), flow rate of the gaseous mixture between 50 - 72 ml/min and the adsorbent masses of 10, 15 and 20 g (fixed bed process). The time for the adsorption batch was 7 h and on the fixed bed was around 180 min. The results of this study showed that in batch adsorption process step with zeolite 13X is efficient and the mass of adsorbed CO2 increases with the increases pressure, decreases with temperature increases and rises due the increase of activation temperature adsorbent. In the batch process were evaluated the breakthrough curves, which were compared with adsorption isotherms represented by the models of Langmuir, Freündlich and Toth. All models well adjusted to the experimental points, but the Langmuir model was chosen in view of its use in the dynamic model does not have implications for adsorption (indeterminacy and larger number of parameters such as occurred with others) in solving the equation. In the fixed bed dynamic study with the synthetic gas mixture, 20 g of mass adsorbent showed the maximum adsorption percentage 46.7% at 40 °C temperature and 50 mL/min of flow rate. The model was satisfactorily fitted to the three breakthrough curves and the parameters were: axial dispersion coefficient (0.0165 dm2/min), effective diffusivity inside the particle (dm2/min 0.0884) and external transfer coefficient mass (0.45 dm/min). The breakthrough curve for CO2 in the process of pyrolysis of the sludge showed a fast saturation with traces of aerosols presents in the gas phase into the fixed bed under the reaction process

Efeitos do treinamento de dupla tarefa no controle do equilíbrio dinâmico e estático de idosas pré-frágeis: um estudo piloto

The increasing world population of older individuals has become a subject of growing research for prevention and reversibility of the frailty because it is a major risk factor for the occurrence of falls, especially when it involves everyday situations of dual task. Some rehabilitation programs have already used the methods of dual-task with general exercises for improving gait and postural control, but has been reported that these interventions have little specificity with limited success to improve certain aspects of static and dynamic position during the performance of functional tasks. This study aimed to verify the measures of postural control in a group of elderly women with fragility phenotype after physical therapy intervention program based on dual-task treadmill training. We selected six pre-frail elderly subjects, with a minimum age of 65, female, living in the community and randomly assigned to two groups. The survey was conducted twice a week for 45 minutes, for four weeks. The simple task intervention consisted only in training on a treadmill and the dual task consisted of in treadmill training associated with visual stimuli. The assessments were made with the use of the Berg Balance Scale (BBS) and the Balance Master® computerized posturography, static and dynamically. The effects of retention were observed after one month, using the same instruments earlier used. The results showed a tendency toward improvement or maintenance of the balance after training on a treadmill, especially with respect to static equilibrium. Both groups showed the most notable changes in the variables related to gait, as the length and speed. The BBS scores and the baropodometric variables showed that the experimental group could keep all values similar or better even one month after completion of training unlike the control group. We concluded that the dual-task performance had no additional value in relation to the improvement of balance in general, but we observed that the effectiveness of visual stimulation occurred in the maintenance of short term balancevariables

O Ofício das Rezadeiras: um estudo antropológico sobre as práticas terapêuticas e a comunhão de crenças em Cruzeta/RN

The present Master´s dissertation aims to study the practices of the rezadeiras, Brazilian women healers, through an anthropological perspective. Special attention will be given to the understanding of these practices as a dynamic process in relation to those women who heal in Cruzeta (Seridó, Rio Grande do Norte), where is located our ethnographic research. For this research, twenty four rezadeiras were contacted and colaborated with our work plan. Among them, two were pentecostal rezadeiras and another one was member of the Jurema cult, an afro-brazilian religious cult. Similarities among these women healers were perceived in the research process, mostly in terms of their learning process and the use of certain objects and ritual techniques. However, apparent differences among them gave us the chance for understanding and reflecting on the actual heterogeneity of this world of specialists. Furthermore, i tried to capture the relations between the rezadeiras and the therapeutic practices from health professionals or the religious practices of religious leaders (Catholic, pentecostal, etc). It is possible to ascertain about the complementarity between therapeutic practices from different cultural logics. This complementarity is also perceived through the religious interchanges and transits among different healers, including those who have different religious beliefs. In this work, rituals are also described and they are a crucial factor to the understanding of this particular religious and therapeutic practice conducted by women. Following these ideas, our basic aim is to understand how the rezadeiras make interpretations about health and illness, specially those ones which are particular associated with their practices, the so called "doenças de rezadeiras"

Síntese, estudo cinético e análise microestrutural do sistema cério-níquel obtido pelo método pechini

The cerium oxide has a high potential for use in removing pollutants after combustion, removal of organic matter in waste water and the fuel-cell technology. The nickel oxide is an attractive material due to its excellent chemical stability and their optical properties, electrical and magnetic. In this work, CeO2-NiO- systems on molars reasons 1:1(I), 1:2(II) e 1:3(III) metal-citric acid were synthesized using the Pechini method. We used techniques of TG / DTG and ATD to monitor the degradation process of organic matter to the formation of the oxide. By thermogravimetric analysis and applying the dynamic method proposed by Coats-Redfern, it was possible to study the reactions of thermal decomposition in order to propose the possible mechanism by which the reaction takes place, as well as the determination of kinetic parameters as activation energy, Ea, pre-exponential factor and parameters of activation. It was observed that both variables exert a significant influence on the formation of complex polymeric precursor. The model that best fitted the experimental data in the dynamic mode was R3, which consists of nuclear growth, which formed the nuclei grow to a continuous reaction interface, it proposes a spherical symmetry (order 2 / 3). The values of enthalpy of activation of the system showed that the reaction in the state of transition is exothermic. The variables of composition, together with the variable temperature of calcination were studied by different techniques such as XRD, IV and SEM. Also a study was conducted microstructure by the Rietveld method, the calculation routine was developed to run the package program FullProf Suite, and analyzed by pseudo-Voigt function. It was found that the molar ratio of variable metal-citric acid in the system CeO2-NiO (I), (II), (III) has strong influence on the microstructural properties, size of crystallites and microstrain network, and can be used to control these properties

Estudo e implementação de algoritmos inteligentes para detecção e classificação de falhas na medição de gás natural

This master dissertation presents the study and implementation of inteligent algorithms to monitor the measurement of sensors involved in natural gas custody transfer processes. To create these algoritmhs Artificial Neural Networks are investigated because they have some particular properties, such as: learning, adaptation, prediction. A neural predictor is developed to reproduce the sensor output dynamic behavior, in such a way that its output is compared to the real sensor output. A recurrent neural network is used for this purpose, because of its ability to deal with dynamic information. The real sensor output and the estimated predictor output work as the basis for the creation of possible sensor fault detection and diagnosis strategies. Two competitive neural network architectures are investigated and their capabilities are used to classify different kinds of faults. The prediction algorithm and the fault detection classification strategies, as well as the obtained results, are presented

Estudo comparativo do desempenho de controladores robustos aplicados a um sistema de tanques acoplados.

Currently the uncertain system has attracted much academic community from the standpoint of scientific research and also practical applications. A series of mathematical approaches emerge in order to troubleshoot the uncertainties of real physical systems. In this context, the work presented here focuses on the application of control theory in a nonlinear dynamical system with parametric variations in order and robustness. We used as the practical application of this work, a system of tanks Quanser associates, in a configuration, whose mathematical model is represented by a second order system with input and output (SISO). The control system is performed by PID controllers, designed by various techniques, aiming to achieve robust performance and stability when subjected to parameter variations. Other controllers are designed with the intention of comparing the performance and robust stability of such systems. The results are obtained and compared from simulations in Matlab-simulink.

OBALUAIÊ: um estudo sobre o estigma no convívio com o HIV/Aids em terreiros de Umbanda na cidade de Fortaleza-Ceará

The tradition and living in African-Brazilian religious spaces, called yards, reveal how dynamic the reproduction and exchange of knowledge are, and that through their worldview, reveal ways of dealing with health and disease. The yards are culturally rich territories, in which people shape concepts, practices, and beliefs about health, disease and forms of healing, passed on from generation to generation through oral tradition. With the advent of HIV/AIDS from the 80s, a new challenge is established in the community of the yards and in the individual trajectories of people affected by the disease, who since an early age participate in this religious practice. The objective of this research is the analysis on the stigma in living with HIV/AIDS in yards of Umbanda in Fortaleza-Ceará, considering the (re)production of social dramas experienced by the community in question. During the investigation we adopted two basic parameters: the first one considers the understanding of the reproduction of stigma (or deteriorated identity) in relation to HIV/AIDS in its socio-historical dimension and its effects in the investigated context (Goffman, 1988). And the second one refers to the creation and reproduction of social dramas as a social experience carried through learning, handling and symbolic performance, which is reproduced in four stages: rupture, crisis, corrective action and reintegration (Turner, 1971)

Avaliação da capacidade para o trabalho do servidor público: um estudo de caso em uma instituição federal de ensino superior

The ability to work, considered as resulting from a dynamic process between the individual resources in relation to their work, influenced from various factors such as sociodemographic, lifestyle, aging process and requirements of work. Aiming analyze the ability to work in a population of public servants, the study analyzed 132 public servants volunteers of the infrastructure sector, in a Federal Institution of Higher Education of the state of Rio Grande do Norte, Northeast, Brazil. Data were collected through a questionnaire called the Index of Capacity for Work - ICT. The variable analysis was done by using descriptive statistics of means, standard deviations, median minimum and maximum values of the scores of quantitative variables. The joint analysis of the variables was performed by multiple linear regression. The server had low capacity to work 11 (8.33%), moderate 31 (23.48%), good 54 (40.91), and Great 28 (21.21). Multiple regression analysis, adjusted for age, sex, education, age started to work, length of service, current capacity and full of disease, showed that best explained the variation of the CTI were age, current capacity and full of disease. The survey showed that 75% of the servers showed ICT below 43, so capacity low, moderate or good and only 25% of respondents had the CTI servers over 43 points, so great capacity for work. According to the recommendations of FIOH - Finnish Institute of Occupational Health, for servers that have these scores be implemented whose objective is to restore the ability to work which is low, improving the capacity for moderate work, support the capacity for the good work and maintain the ability to work great. Therefore, we recommend that the ICT is implemented in other units of the IFES survey in the perspective of achieving a real situation of all its servers, enabling the implementation of these measures as necessary to promote recovery and health of its employees.

Cultura organizacional e desempenho dos colaboradores :um estudo exploratório no setor hoteleiro

This work focuses on the relationship between organizational culture and quality culture in the hotel sector of NATAL/RN with respect to employee performance. The themes organizational culture and quality have been the research focus of administration theorists and a constant concern of professional managers, since the Japanese demonstrated effective forms or western management. In this study, the Competing Values Model (C.V.M.) (Quinn e Cameron, 1996; Quinn, 1998; Santos, 1998, 2000; Teixeira, 2001), which was tested on north-American organizations and considered a high value academic and professional instrument, was applied. The model maps the organizational culture on a profile with four elements: clan, adhocracy, market and hierarchy. The C.V.M., associated with the taximetrics created by Cameron (which classifies quality culture in for levels: status quo, error detection, error prevention and perpetual creative quality) has been related with organizational performance. In this study, these two models are used jointly and tested in the hotel sector. The results indicate that the strongest element of the profile is clan, which is characterized by internal focus, participation and people involvement, followed by the adhocracy element, which has an external focus, emphasizes flexibility and is characterized by dynamic enterprising and creativity. Regarding the level of the culture s quality in the hotel, the highest level, that of perpetual improvement and creativity, which attempts to enchant and to surprise the clients, was most frequently cited, followed by the error detection level, which has as its goal to discover and correct mistakes, trying, consequently, to reduce waste. The results suggest that employee performance as measured on some indicators is related to elements of the organizational culture profile and quality level

Estudo de estratégias de otimização para poços de petróleo com elevação por bombeio de cavidades progressivas

The progressing cavity pump artificial lift system, PCP, is a main lift system used in oil production industry. As this artificial lift application grows the knowledge of it s dynamics behavior, the application of automatic control and the developing of equipment selection design specialist systems are more useful. This work presents tools for dynamic analysis, control technics and a specialist system for selecting lift equipments for this artificial lift technology. The PCP artificial lift system consists of a progressing cavity pump installed downhole in the production tubing edge. The pump consists of two parts, a stator and a rotor, and is set in motion by the rotation of the rotor transmitted through a rod string installed in the tubing. The surface equipment generates and transmits the rotation to the rod string. First, is presented the developing of a complete mathematical dynamic model of PCP system. This model is simplified for use in several conditions, including steady state for sizing PCP equipments, like pump, rod string and drive head. This model is used to implement a computer simulator able to help in system analysis and to operates as a well with a controller and allows testing and developing of control algorithms. The next developing applies control technics to PCP system to optimize pumping velocity to achieve productivity and durability of downhole components. The mathematical model is linearized to apply conventional control technics including observability and controllability of the system and develop design rules for PI controller. Stability conditions are stated for operation point of the system. A fuzzy rule-based control system are developed from a PI controller using a inference machine based on Mandami operators. The fuzzy logic is applied to develop a specialist system that selects PCP equipments too. The developed technics to simulate and the linearized model was used in an actual well where a control system is installed. This control system consists of a pump intake pressure sensor, an industrial controller and a variable speed drive. The PI control was applied and fuzzy controller was applied to optimize simulated and actual well operation and the results was compared. The simulated and actual open loop response was compared to validate simulation. A case study was accomplished to validate equipment selection specialist system

Dispositivos planares integrados utilizando método dinâmico com metamateriais e PBG

This work presents a theoretical, numerical and computation analysis of parameters of a rectangular microstrip antenna with metamaterial substrate, fin line as a coupler and also integrated devices like integrated filter antenna. It is applied theory to full-wave of Transverse Transmission Line - TTL method, to characterize the magnitude of the substrate and obtain the general equations of the electromagnetic fields. About the metamaterial, they are characterized by permittivity and permeability tensor, reaching to the general equations for the electromagnetic fields of the antenna. It is presented a study about main representation of PBG(Photonic Band Gap) material and its applied for a specific configuration. A few parameters are simulated some structures in order to reduce the physical dimensions and increase the bandwidth. The results are presented through graphs. The theoretical and computational analysis of this work have shown accurate and relatively concise. Conclusions are drawn and suggestions for future work

Método dinâmico aplicado para antenas cilíndricas

Nowadays there has been a major breakthrough in the aerospace area, with regard to rocket launches to research, experiments, telemetry system, remote sensing, radar system (tracking and monitoring), satellite communications system and insertion of satellites in orbit. This work aims at the application of a circular cylindrical microstrip antenna, ring type, and other cylindrical rectangular in structure of a rocket or missile to obtain telemetry data, operating in the range of 2 to 4 GHz, in S-band. Throughout this was developed just the theoretical analysis of the Transverse transmission line method which is a method of rigorous analysis in spectral domain, for use in rockets and missiles. This analyzes the spread in the direction "ρ" , transverse to dielectric interfaces "z" and "φ", for cylindrical coordinates, thus taking the general equations of electromagnetic fields in function of e [1]. It is worth mentioning that in order to obtain results, simulations and analysis of the structure under study was used HFSS program (High Frequency Structural Simulator) that uses the finite element method. With the theory developed computational resources were used to obtain the numerical calculations, using Fortran Power Station, Scilab and Wolfram Mathematica ®. The prototype was built using, as a substrate, the ULTRALAM ® 3850, of Rogers Corporation, and an aluminum plate as a cylindrical structure used to support. The agreement between the measured and simulated results validate the established processes. Conclusions and suggestions are presented for continuing this work

Estudo de uma coluna de absorção recheada para desidratação do gás natural utilizando microemulsão como absorvente

During natural gas processing, water removal is considered as a fundamental step in that combination of hydrocarbons and water favors the formation of hydrates. The gas produced in the Potiguar Basin (Brazil) presents high water content (approximately 15000 ppm) and its dehydration is achieved via absorption and adsorption operations. This process is carried out at the Gas Treatment Unit (GTU) in Guamaré (GMR), in the State of Rio Grande do Norte. However, it is a costly process, which does not provide satisfactory results when water contents as low as 0.5 ppm are required as the exit of the GTU. In view of this, microemulsions research is regarded as an alternative to natural gas dehydration activities. Microemulsions can be used as desiccant fluids because of their unique proprieties, namely solubilization enhancement, reduction in interfacial tensions and large interfacial area between continuous and dispersed phases. These are actually important parameters to ensure the efficiency of an absorption column. In this work, the formulation of the desiccant fluid was determined via phases diagram construction, employing there nonionic surfactants (RDG 60, UNTL L60 and AMD 60) and a nonpolar fluid provided by Petrobras GMR (Brazil) typically comprising low-molecular weight liquid hydrocarbons ( a solvent commonly know as aguarrás ). From the array of phases diagrams built, four representative formulations have been selected for providing better results: 30% RDG 60-70% aguarrás; 15% RDG 60-15% AMD 60-70% aguarrás, 30% UNTL L60-70% aguarrás, 15% UNTL L60-15% AMD 60-70% aguarrás. Since commercial natural gas is already processed, and therefore dehydrated, it was necessary to moister some sample prior to all assays. It was then allowed to cool down to 13ºC and interacted with wet 8-12 mesh 4A molecular sieve, thus enabling the generation of gas samples with water content (approximately 15000 ppm). The determination of the equilibrium curves was performed based on the dynamic method, which stagnated liquid phase and gas phase at a flow rate of 200 mL min-1. The hydrodynamic study was done with the aim of established the pressure drop and dynamic liquid hold-up. This investigation allowed are to set the working flow rates at 840 mL min-1 for the gas phase and 600 mLmin-1 for the liquid phase. The mass transfer study indicated that the system formed by UNTL L60- turpentine-natural gas the highest value of NUT

Síntese e caracterização de tensoativos e estudo de equilíbrio de fase dos sistemas CnH2n+2/H2O/CnH2n+1COONa/But-OH

The growing utilization of surfactants in several different areas of industry has led to an increase on the studies involving solutions containing this type of molecules. Due to its amphiphilic nature, its molecule presents one polar part and one nonpolar end, which easily interacts with other molecules, being able to modify the media properties. When the concentration in which its monomers are saturated, the airliquid system interface is reached, causing a decrease in interfacial tension. The surfactants from pure fatty acids containing C8, C12 and C16 carbonic chains were synthesized in an alcoholic media using sodium hydroxide. They were characterized via thermal analysis (DTA and DTG) and via infrared spectroscopy, with the intention of observing their purity. Physical and chemical properties such as superficial tension, critical micelle concentration (c.m.c), surfactant excess on surface and Gibbs free energy of micellization were determined in order to understand the behaviour of these molecules with an aqueous media. Pseudo-ternary phase diagrams were obtained aiming to limit the Windsor equilibria conditions so it could be possible to understand how the surfactants carbonic chain size contributes to the microemulsion region. Solutions with known concentrations were prepared to study how the surfactants can influence the dynamic light scattering spectroscopy (DLS) and how the diffusion coefficient is influenced when the media concentration is altered. The results showed the variation on the chain size of the studied surfactant lipophilic part allows the conception of surfactants with similar interfacial properties, but dependent on the size of the lipophilic part of the surfactant. This variation causes the surfactant to have less tendency of microemulsionate oil in water. Another observed result is that the n-alcanes molecule size promoted a decrease on the microemulsion region on the obtained phase diagrams

Um estudo na teoria do movimento brownianno com viscosidade variável

In this work we investigate the stochastic behavior of a large class of systems with variable damping which are described by a time-dependent Lagrangian. Our stochastic approach is based on the Langevin treatment describing the motion of a classical Brownian particle of mass m. Two situations of physical interest are considered. In the first one, we discuss in detail an application of the standard Langevin treatment (white noise) for the variable damping system. In the second one, a more general viewpoint is adopted by assuming a given expression to the so-called collored noise. For both cases, the basic diffententiaql equations are analytically solved and al the quantities physically relevant are explicitly determined. The results depend on an arbitrary q parameter measuring how the behavior of the system departs from the standard brownian particle with constant viscosity. Several types of sthocastic behavior (superdiffusive and subdiffusive) are obteinded when the free pamameter varies continuosly. However, all the results of the conventional Langevin approach with constant damping are recovered in the limit q = 1